Gigabyte Intel X99 Motherboard Lineup

gigabyte x99 featured

Gigabyte have a lot of their popular series of motherboards coming to X99. Below is a list of each board and their relevant specs, but Gigabyte also include a decent comparison table, which we have included below all of the different boards.

GA-X99-Gaming G1 WIFI

Gigabyte Gaming G1 Wifi

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4,8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • 4-Way Graphics with Premium PCIe Lane
  • Dual M.2 Technology with Onboard WIFI and SSD card
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Onboard Creative Sound Core3D™ quad-core audio processor
  • AMP-UP Audio technology with exclusive Upgradable OP-AMP
  • Independent Right and Left Audio Channel PCB Layers
  • LED lighting for the audio guard light path and the back panel LED
  • Dual DAC-UP USB ports
  • Gold plated audio ports
  • High end Nichicon audio capacitors
  • Killer™ E2200 and Intel gaming networking
  • SATA Express support for 10 Gb/s data transfer
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”Gigabyte GA-X99-Gaming G1 WIFI Full Specifications” id=”gigabyte1″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Creative® Sound Core 3D chip
  2. Support for Sound Blaster Recon3Di
  3. TI Burr Brown® OPA2134 operational amplifier
  4. High Definition Audio
  5. 2/5.1-channel
  6. Support for S/PDIF Out
LAN
  1. 1 x Qualcomm® Atheros Killer E2201 chip (10/100/1000 Mbit) (LAN1)
  2. 1 x Intel® GbE LAN phy (10/100/1000 Mbit) (LAN2)
Wireless Communication module
  1. Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
  2. Bluetooth 4.0, 3.0+HS, 2.1+EDR
  3. Support for 11ac wireless standard and up to 867 Mbps data rate
    * Actual data rate may vary depending on environment and equipment.
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
    1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
      * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
      * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
      (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

Chipset:

  1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
    (An operating system installed on the SATA3 0~5 ports cannot be used on the sSATA3 0~3 ports.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (available through the internal USB headers)
  2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + 2 Renesas® uPD720210 USB 3.0 Hubs:

  1. 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x I/O shield audio LED power connector
  5. 1 x heatsink LED power connector
  6. 1 x SATA Express connector
  7. 10 x SATA 6Gb/s connectors
  8. 1 x M.2 Socket 3 connector
  9. 1 x CPU fan header
  10. 1 x water cooling fan header (CPU_OPT)
  11. 3 x system fan headers
  12. 1 x front panel header
  13. 1 x front panel audio header
  14. 2 x USB 3.0/2.0 headers
  15. 2 x USB 2.0/1.1 headers
  16. 1 x Thunderbolt add-in card connector
  17. 1 x Clear CMOS jumper
  18. 1 x power button
  19. 1 x reset button
  20. 1 x Clear CMOS button
  21. 1 x Direct to BIOS button
  22. 1 x audio gain control switch
  23. Voltage Measurement Points
  24. 2 x BIOS switches
Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x Fast Boot button
  4. 1 x Clear CMOS button
  5. 8 x USB 3.0/2.0 ports
  6. 2 x USB 2.0/1.1 ports
  7. 2 x RJ-45 ports
  8. 1 x optical S/PDIF Out connector
  9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)
  10. 2 x SMA antenna connectors (2T2R)
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Game Controller
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. E-ATX Form Factor; 30.5cm x 25.9cm

[/accordion]

 

GA-X99-Gaming 7 WIFI

Gigabyte Gaming 7 Wifi

 

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4,8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • 4-Way Graphics with Premium PCIe Lane
  • Dual M.2 Technology with Onboard WIFI and SSD card
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Onboard Creative Sound Core3D™ quad-core audio processor
  • AMP-UP Audio technology with exclusive Upgradable OP-AMP
  • Independent Right and Left Audio Channel PCB Layers
  • LED lighting for the audio guard light path and the back panel LED
  • Dual DAC-UP USB ports
  • Gold plated audio ports
  • High end Nichicon audio capacitors
  • Killer™ E2200 and Intel gaming networking
  • SATA Express support for 10 Gb/s data transfer
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”GA-X99-Gaming 7 WIFI Full Specifications” id=”gigabyte2″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Creative® Sound Core 3D chip
  2. Support for Sound Blaster Recon3Di
  3. TI Burr Brown® OPA2134 operational amplifier
  4. High Definition Audio
  5. 2/5.1-channel
  6. Support for S/PDIF Out
LAN
  1. 1 x Qualcomm® Atheros Killer E2201 chip (10/100/1000 Mbit) (LAN1)
  2. 1 x Intel® GbE LAN phy (10/100/1000 Mbit) (LAN2)
Wireless Communication module
  1. Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
  2. Bluetooth 4.0, 3.0+HS, 2.1+EDR
  3. Support for 11ac wireless standard and up to 867 Mbps data rate
    * Actual data rate may vary depending on environment and equipment.
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
    1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
      * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
      * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
      (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

Chipset:

  1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
    (An operating system installed on the SATA3 0~5 ports cannot be used on the sSATA3 0~3 ports.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (available through the internal USB headers)
  2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + 2 Renesas® uPD720210 USB 3.0 Hubs:

  1. 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x I/O shield audio LED power connector
  5. 1 x heatsink LED power connector
  6. 1 x SATA Express connector
  7. 10 x SATA 6Gb/s connectors
  8. 1 x M.2 Socket 3 connector
  9. 1 x CPU fan header
  10. 1 x water cooling fan header (CPU_OPT)
  11. 3 x system fan headers
  12. 1 x front panel header
  13. 1 x front panel audio header
  14. 2 x USB 3.0/2.0 headers
  15. 2 x USB 2.0/1.1 headers
  16. 1 x Thunderbolt add-in card connector
  17. 1 x Clear CMOS jumper
  18. 1 x power button
  19. 1 x reset button
  20. 1 x Clear CMOS button
  21. 1 x Direct to BIOS button
  22. 1 x audio gain control switch
  23. Voltage Measurement Points
  24. 2 x BIOS switches
Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x Fast Boot button
  4. 1 x Clear CMOS button
  5. 8 x USB 3.0/2.0 ports
  6. 2 x USB 2.0/1.1 ports
  7. 2 x RJ-45 ports
  8. 1 x optical S/PDIF Out connector
  9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)
  10. 2 x SMA antenna connectors (2T2R)
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Game Controller
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. E-ATX Form Factor; 30.5cm x 25.9cm

[/accordion]

 

GA-X99-Gaming 5

Gigabyte Gaming 5

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4,8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • 4-Way Graphics with Premium PCIe Lane
  • Dual M.2 Technology for SSD Drive and WIFI card
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Onboard Creative Sound Core3D™ quad-core audio processor
  • AMP-UP Audio technology with exclusive Upgradable OP-AMP
  • Independent Right and Left Audio Channel PCB Layers
  • LED lighting for the audio guard light path and the back panel LED
  • Quad DAC-UP USB ports
  • Gold plated audio ports
  • High end Nichicon audio capacitors
  • Killer™ E2200 gaming networking
  • SATA Express support for 10 Gb/s data transfer
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”Gigabyte GA-X99-Gaming 5 Full Specifications” id=”gigabyte3″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operates in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Creative® Sound Core 3D chip
  2. Support for Sound Blaster Recon3Di
  3. TI Burr Brown® OPA2134 operational amplifier
  4. High Definition Audio
  5. 2/5.1-channel
  6. Support for S/PDIF Out
LAN
  1. Qualcomm® Atheros Killer E2201 LAN chip (10/100/1000 Mbit)
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1/PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
    1. 2 x PCI Express x16 slots, running at x8 (PCIE_3/PCIE_4)
      * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
      * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
      (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

Chipset:

  1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only 
    (An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + Renesas® uPD720210 USB 3.0 Hub:

  1. 4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connectorŠ
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x I/O shield audio LED power connector
  5. 1 x heatsink LED power connector
  6. 1 x M.2 Socket 3 connector
  7. 1 x SATA Express connector
  8. 10 x SATA 6Gb/s connectors
  9. 1 x CPU fan header
  10. 1 x water cooling fan header (CPU_OPT)
  11. 3 x system fan headers
  12. 1 x front panel header
  13. 1 x front panel audio header
  14. 1 x USB 3.0/2.0 header
  15. 2 x USB 2.0/1.1 headers
  16. 1 x Thunderbolt add-in card connectorŠ
  17. 1 x Clear CMOS jumper
  18. 1 x audio gain control switch
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 6 x USB 3.0/2.0 ports
  4. 4 x USB 2.0/1.1 ports
  5. 1 x optical S/PDIF Out connector
  6. 1 x RJ-45 port
  7. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone)
  8. 2 x Wi-Fi antenna connector holes
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Game Controller
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. ATX Form Factor; 30.5cm x 24.4cm

[/accordion]

 

GA-X99-SOC Force

Gigabyte X99 SOC Force

 

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4,8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • Exclusive GIGABYTE OC Features
  • Copper Bussmann server level Chokes and POSCAP™ Capacitor
  • Temp sensor port
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Extreme 4-way SLI™ and CrossFire™ support with OC Brace
  • Turbo M.2 connector for up to 20 Gb/s data transfer
  • SATA Express support for 10 Gb/s data transfer
  • Intel gaming networking
  • 2x copper PCB design
  • Realtek ALC1150 115dB SNR HD Audio with Built-in rear audio amplifier
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”GigabyteGA-X99-SOC Force Full Specifications ” id=”gigabyte132″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operates in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Realtek® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out
LAN
  1. Intel® GbE LAN chip (10/100/1000 Mbit)
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
    1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
      * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
      * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
      (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
  1. 3 x PCI Express x1 slots
    (All PCI Express x1 slots conform to PCI Express 2.0 standard.)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_20G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_20G and SATA Express connectors can only be used one at a time. The SATA Express connector becomes unavailable when an M.2 SSD is installed, but the SATA3 4/5 connectors are still functional.)
  5. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
    (An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB Chipset:

  1. 2 x USB 3.0/2.0 ports available through the internal USB header
  2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + 2 Renesas® uPD720210 USB 3.0 Hubs:

  1. 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x OC PEG Power Connector
  4. 1 x SATA Express connector
  5. 1 x M.2 Socket 3 connector
  6. 10 x SATA 6Gb/s connectors
  7. 1 x CPU fan header
  8. 1 x water cooling fan header (CPU_OPT)
  9. 3 x system fan headers
  10. 1 x heatsink LED power connector
  11. 1 x Thunderbolt add-in card connector
  12. 1 x OC Panel connector (for future expansion)
  13. 1 x front panel header
  14. 1 x front panel audio header
  15. 1 x S/PDIF Out header
  16. 1 x USB 3.0/2.0 header
  17. 2 x USB 2.0/1.1 headers
  18. 1 x serial port header
  19. 1 x Clear CMOS jumper
  20. 1 x power button
  21. 1 x reset button
  22. 1 x Clear CMOS button
  23. 1 x Gear button
  24. 1 x OC Tag button
  25. 1 x OC Trigger switch
  26. 1 x CPU BCLK Down button
  27. 1 x CPU BCLK Up button
  28. 1 x CPU Ratio Down button
  29. 1 x CPU Ratio Up button
  30. 1 x Settings Lock button
  31. 1 x Direct to BIOS button
  32. 1 x OC PCIe switch
  33. 1 x OC Ignition button
  34. 1 x Clear Battery button
  35. 1 x DualBIOS switch
  36. 1 x onboard voltage measurement module
  37. Temp sensor ports
Back Panel Connectors
  1. 4 x USB 2.0/1.1 ports
  2. 1 x PS/2 keyboard/mouse port
  3. 1 x CPU overclocking button
  4. 1 x BIOS switch button
  5. 1 x Clear CMOS button
  6. 8 x USB 3.0/2.0 ports
  7. 1 x RJ-45 port
  8. 1 x optical S/PDIF Out connector
  9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller
  1. iTE I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. E-ATX Form Factor; 30.5cm x 26.4cm

[/accordion]

 

GA-X99-UD7 WIFI

Gigabyte X99 UD7 Wifi

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4, 8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • 4-Way Graphics with Premium PCIe Lane
  • Dual M.2 Technology for SSD Drive and Onboard WIFI card
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Realtek ALC1150 115dB SNR HD audio with built-in Rear Audio Amplifier
  • Independent Right and Left Audio Channel PCB Layers
  • LED lighting for the audio guard light path and the back panel LED
  • All Stainless Steel connectors on rear panel
  • High end quality audio capacitors
  • Dual Intel GbE LAN with Teaming functionality
  • SATA Express support for up to 10 Gb/s data transfer
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”Gigabyte GA-X99-UD7 WIFI Full Specifications” id=”gigabyte14″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Realtek® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out
LAN
  1. 2 x Intel® GbE LAN chips (10/100/1000 Mbit)
Wireless Communication module
  1. Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
  2. Bluetooth 4.0, 3.0+HS, 2.1+EDR
  3. Support for 11ac wireless standard and up to 867 Mbps data rate
    * Actual data rate may vary depending on environment and equipment.
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
    1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
      * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
      * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
      (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed. (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

ŠChipset:

  1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only (An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (available through the internal USB headers)
  2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + 2 Renesas® uPD720210 USB 3.0 Hubs:

  1. 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x SATA Express connector
  5. 10 x SATA 6Gb/s connectors
  6. 1 x M.2 Socket 3 connector
  7. 1 x CPU fan header
  8. 1 x water cooling fan header (CPU_OPT)
  9. 3 x system fan headers
  10. 1 x heatsink LED power connector
  11. 1 x I/O shield audio LED power connector
  12. 1 x front panel header
  13. 1 x front panel audio header
  14. 2 x USB 3.0/2.0 headers
  15. 2 x USB 2.0/1.1 headers
  16. 1 x Thunderbolt add-in card connector
  17. 1 x Clear CMOS jumper
  18. 1 x power button
  19. 1 x reset button
  20. 1 x Clear CMOS button
  21. 1 x Direct to BIOS button
  22. 2 x BIOS switches
  23. Voltage Measurement Points
Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x Fast Boot button
  4. 1 x Clear CMOS button
  5. 8 x USB 3.0/2.0 ports
  6. 2 x USB 2.0/1.1 ports
  7. 2 x RJ-45 ports
  8. 2 x SMA antenna connectors (2T2R)
  9. 1 x optical S/PDIF Out connector
  10. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
  3. cFosSpeed
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. E-ATX Form Factor; 30.5cm x 25.9cm

[/accordion]

 

GA-X99-UD5 WIFI

Gigabyte X99 UD5 Wifi

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4, 8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • 4-Way Graphics with Premium PCIe Lane
  • Dual M.2 Technology for SSD Drive and Onboard WIFI card
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Realtek ALC1150 115dB SNR HD audio with built-in Rear Audio Amplifier
  • Independent Right and Left Audio Channel PCB Layers
  • LED lighting for the audio guard light path and the back panel LED
  • All Stainless Steel connectors on rear panel
  • High end quality audio capacitors
  • Dual Intel GbE LAN with Teaming functionality
  • SATA Express support for up to 10 Gb/s data transfer
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”Gigabyte GA-X99-UD5 WIFI Full Specifications” id=”gigabyte15″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Realtek® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out
LAN
  1. 2 x Intel® GbE LAN chips (10/100/1000 Mbit)
Wireless Communication module
  1. Wi-Fi 802.11 a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
  2. Bluetooth 4.0, 3.0+HS, 2.1+EDR
  3. Support for 11ac wireless standard and up to 867 Mbps data rate
    * Actual data rate may vary depending on environment and equipment.
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
      1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
        * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
        * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
        (All PCI Express x16 slots conform to PCI Express 3.0 standard.)

Š

    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

Chipset:

    1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only

(An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (available through the internal USB headers)
  2. 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)

Š Chipset + 2 Renesas® uPD720210 USB 3.0 Hubs:

  1. 8 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x SATA Express connector
  5. 10 x SATA 6Gb/s connectors
  6. 1 x M.2 Socket 3 connector
  7. 1 x CPU fan header
  8. 1 x water cooling fan header (CPU_OPT)
  9. 3 x system fan headers
  10. 1 x heatsink LED power connector
  11. 1 x I/O shield audio LED power connector
  12. 1 x front panel header
  13. 1 x front panel audio header
  14. 2 x USB 3.0/2.0 headers
  15. 2 x USB 2.0/1.1 headers
  16. 1 x Thunderbolt add-in card connector
  17. 1 x Clear CMOS jumper
  18. 1 x power button
  19. 1 x reset button
  20. 1 x Clear CMOS button
  21. 1 x Direct to BIOS button
  22. 2 x BIOS switches
  23. Voltage Measurement Points
Back Panel Connectors
  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x Fast Boot button
  4. 1 x Clear CMOS button
  5. 8 x USB 3.0/2.0 ports
  6. 2 x USB 2.0/1.1 ports
  7. 2 x RJ-45 ports
  8. 2 x SMA antenna connectors (2T2R)
  9. 1 x optical S/PDIF Out connector
  10. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
  3. cFosSpeed
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. E-ATX Form Factor; 30.5cm x 25.9cm

[/accordion]

 

GA-X99-UD4

Gigabyte X99 UD4

 

  • Supports New Intel® Core™ i7 Processor Extreme Edition
  • 4 Channel DDR4, 8 DIMMs
  • Genuine All Digital Power Design with IR Digital PWM & IR PowIRstage® ICs
  • 4-Way Graphics with Premium PCIe Lane
  • Dual M.2 Technology for SSD Drive and WIFI card
  • 6x(30µ) Gold Plating for CPU socket, Memory DIMMs and PCIe slots
  • Realtek ALC1150 115dB SNR HD audio with built-in Rear Audio Amplifier
  • Independent Right and Left Audio Channel PCB Layers
  • LED lighting for the audio guard light path and the back panel LED
  • All Stainless Steel connectors on rear panel
  • High end quality audio capacitors
  • SATA Express support for up to 10 Gb/s data transfer
  • Long lifespan Durable Black™ Solid caps
  • APP Center including EasyTune™ and Cloud Station™ utilities
  • Thunderbolt™ Ready
  • GIGABYTE UEFI DualBIOS™ with Q-Flash Plus USB port
  • Safer design around screw mounting holes

[accordion title=”GigabyteGA-X99-UD4 Full Specifications ” id=”gigabyte16″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Realtek® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out
LAN
  1. Intel® GbE LAN chips (10/100/1000 Mbit)
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
      1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
        * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
        * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
        (All PCI Express x16 slots conform to PCI Express 3.0 standard.)

Š

    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

Chipset:

    1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only

(An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + Renesas® uPD720210 USB 3.0 Hub:

  1. 4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x I/O shield audio LED power connector
  5. 1 x heatsink LED power connector
  6. 1 x M.2 Socket 3 connector
  7. 1 x SATA Express connector
  8. 10 x SATA 6Gb/s connectors
  9. 1 x CPU fan header
  10. 1 x water cooling fan header (CPU_OPT)
  11. 3 x system fan headers
  12. 1 x front panel header
  13. 1 x front panel audio header
  14. 1 x USB 3.0/2.0 header
  15. 2 x USB 2.0/1.1 headers
  16. 1 x Trusted Platform Module (TPM) header
  17. 1 x Thunderbolt add-in card connector
  18. 1 x Clear CMOS jumper
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 6 x USB 3.0/2.0 ports
  4. 4 x USB 2.0/1.1 ports
  5. 1 x RJ-45 port
  6. 1 x optical S/PDIF Out connector
  7. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
  8. 2 x Wi-Fi antenna connector holes
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
  3. cFosSpeed
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. ATX Form Factor; 30.5cm x 24.4cm

[/accordion]

 

GA-X99-UD3

Gigabye X99 UD3

[accordion title=”Gigabyte GA-X99-UD3 Full Specifications” id=”gigabyte17″]

CPU
  1. Support for Intel® Core™ i7 processors in the LGA2011-3 package
  2. L3 cache varies with CPU

(Please refer “CPU Support List” for more information.)
Chipset
  1. Intel® X99 Express Chipset
Memory
  1. 4 x DDR4 DIMM sockets supporting up to 32 GB of system memory
    * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
  2. 4 channel memory architecture
  3. Support for DDR4 2133/1866/1600/1333 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules
  6. Support for RDIMM 1Rx8 memory modules (operate in non-ECC mode)

(Please refer “Memory Support List” for more information.)
Audio
  1. Realtek® ALC1150 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for S/PDIF Out
LAN
  1. Intel® GbE LAN chips (10/100/1000 Mbit)
Expansion Slots
    1. 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.
      1. 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
        * The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is populated, the PCIE_1 slot will operate at up to x8 mode.
        * When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and the PCIE_3 operates at up to x4 mode.
        (All PCI Express x16 slots conform to PCI Express 3.0 standard.)

Š

    1. 3 x PCI Express x1 slots
      (The PCI Express x1 slots conform to PCI Express 2.0 standard.)
  1. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology
  1. Support for 4-Way/3-Way/2-Way AMD CrossFire™/NVIDIA® SLI™ technology
    * The 4-Way NVIDIA® SLI™ configuration is not supported when an i7-5820K CPU is installed. To set up a 3-Way SLI configuration, refer to “1-6 Setting up AMD CrossFire™/NVIDIA®SLI™ Configuration.”
Storage Interface Chipset:

  1. 1 x M.2 Socket 3 connector (M2_10G)
  2. 1 x SATA Express connector
  3. 6 x SATA 6Gb/s connectors (SATA3 0~5)
  4. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is installed.
    (M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is installed in the M2_10G connector.)

Chipset:

    1. 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only

(An operating system installed on the SATA3 0~5 connectors cannot be used on the sSATA3 0~3 connectors.)
USB Chipset:

  1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
  2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

Chipset + Renesas® uPD720210 USB 3.0 Hub:

  1. 4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x PCIe power connector
  4. 1 x M.2 Socket 3 connector
  5. 1 x SATA Express connector
  6. 10 x SATA 6Gb/s connectors
  7. 1 x CPU fan header
  8. 1 x water cooling fan header (CPU_OPT)
  9. 3 x system fan headers
  10. 1 x front panel header
  11. 1 x front panel audio header
  12. 1 x USB 3.0/2.0 header
  13. 2 x USB 2.0/1.1 headers
  14. 1 x Trusted Platform Module (TPM) header
  15. 1 x Thunderbolt add-in card connector
  16. 1 x Clear CMOS jumper
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 6 x USB 3.0/2.0 ports
  4. 4 x USB 2.0/1.1 ports
  5. 1 x RJ-45 port
  6. 1 x optical S/PDIF Out connector
  7. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
  8. 2 x Wi-Fi antenna connector holes
I/O Controller
  1. iTE® I/O Controller Chip
H/W Monitoring
  1. System voltage detection
  2. CPU/System/Chipset temperature detection
  3. CPU/CPU OPT/System fan speed detection
  4. CPU/System/Chipset overheating warning
  5. CPU/CPU OPT/System fan fail warning
  6. CPU/CPU OPT/System fan speed control
    * Whether the fan speed control function is supported will depend on the cooler you install.
BIOS
  1. 2 x 128 Mbit flash
  2. Use of licensed AMI UEFI BIOS
  3. Support for DualBIOS™
  4. Support for Q-Flash Plus
  5. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features
  1. Support for APP Center
    * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specifications.
    @BIOS
    Ambient LED
    EasyTune
    EZ Setup
    Fast Boot
    Cloud Station
    ON/OFF Charge
    Smart TimeLock
    Smart Recovery 2
    System Information Viewer
    USB Blocker
    V-Tuner
  2. Support for Q-Flash
  3. Support for Smart Switch
  4. Support for Xpress Install
Bundle Software
  1. Norton® Internet Security (OEM version)
  2. Intel® Smart Response Technology
  3. cFosSpeed
Operating System
  1. Support for Windows 8.1/8/7
Form Factor
  1. ATX Form Factor; 30.5cm x 24.4cm

[/accordion]

 

Comparison

Model Name
X99-Gaming G1 WIFI
X99-Gaming 7 WIFI
X99-Gaming 5
X99-SOC Force
CPU support
Supports New Intel® Core™ i7
Processor Extreme Edition
Supports New Intel® Core™ i7
Processor Extreme Edition
Supports New Intel® Core™ i7
Processor Extreme Edition
Supports New Intel® Core™ i7
Processor Extreme Edition
CPU socket
LGA 2011-3
LGA 2011-3
LGA 2011-3
LGA 2011-3
Chipset
Intel X99 Chipset
Intel X99 Chipset
Intel X99 Chipset
Intel X99 Chipset
Graphics Interface
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
Memory Type
4 Channel DDR4
4 Channel DDR4
4 Channel DDR4
4 Channel DDR4
Memory DIMM
8*DDR4
8*DDR4
8*DDR4
8*DDR4
Expansion slots
3*PCI-E x1
3*PCI-E x1
3*PCI-E x1
3*PCI-E x1
SATA connectors
10*SATA3, 2*M.2, 1*SATA Express*
10*SATA3, 2*M.2, 1*SATA Express*
10*SATA3, 2*M.2, 1*SATA Express*
10*SATA3 ,1*M.2, 1*SATA Express*
SATA RAID
RAID 0,1,5,10
RAID 0,1,5,10
RAID 0,1,5,10
RAID 0,1,5,10
USB
12*USB 3.0 +6*USB 2.0
12*USB 3.0 +6*USB 2.0
8*USB 3.0 +8*USB 2.0
10*USB 3.0 +8*USB 2.0
Audio
Creative Sound Core 3D
Creative Sound Core 3D
Creative Sound Core 3D
Realtek ALC1150 115dB HD Audio
LAN
Dual GbE LAN (Intel+Killer)
Dual GbE LAN (Intel+Killer)
Killer GbE LAN
Intel GbE LAN
Features & Software
11ac WIFI +BT 4.0 card onboard,4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, AMP-UP audio, Creative SBX PRO STUDIO, Dual DAC-UP USB Ports, Gold Plated 30μ CPU/ DDR/ PCI-Ex16, Cloud Station, Thunderbolt™ Ready, Ambient LED, Q-Flash Plus, Fast Boot Button
11ac WIFI +BT 4.0 card onboard, 4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, AMP-UP audio, Creative SBX PRO STUDIO, Dual DAC-UP USB Ports, Gold Plated 30μ CPU/ DDR/ PCI-Ex16, Cloud Station, Thunderbolt™ Ready, Ambient LED, Q-Flash Plus, Fast Boot Button
4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, AMP-UP audio, Creative SBX PRO STUDIO, Quad DAC-UP USB Ports, Gold Plated 30μ CPU/ DDR/ PCI-Ex16, Cloud Station, Thunderbolt™ Ready, Ambient LED,Q-Flash Plus
4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, Gold Plated 30μ CPU/ DDR/ PCI-Ex16, Cloud Station, Thunderbolt™ Ready, Ambient LED, Q-Flash Plus
Form Factor (mm)
E-ATX (305×259)
E-ATX (305×259)
ATX (305×244)
E-ATX (305×264)
Model Name
X99-UD7 WIFI
X99-UD5 WIFI
X99-UD4
X99-UD3
CPU support
Supports New Intel® Core™ i7
Processor Extreme Edition
Supports New Intel® Core™ i7
Processor Extreme Edition
Supports New Intel® Core™ i7
Processor Extreme Edition
Supports New Intel® Core™ i7
Processor Extreme Edition
CPU socket
LGA 2011-3
LGA 2011-3
LGA 2011-3
LGA 2011-3
Chipset
Intel X99 Chipset
Intel X99 Chipset
Intel X99 Chipset
Intel X99 Chipset
Graphics Interface
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
2*PCI-E 3.0 x16 +2*PCI-E 3.0 x8
Memory Type
4 Channel DDR4
4 Channel DDR4
4 Channel DDR4
4 Channel DDR4
Memory DIMM
8*DDR4
8*DDR4
8*DDR4
4*DDR4
Expansion slots
3*PCI-E x1
3*PCI-E x1
3*PCI-E x1
3*PCI-E x1
SATA connectors
10*SATA3, 2*M.2, 1*SATA Express*
10*SATA3, 2*M.2, 1*SATA Express*
10*SATA3, 2*M.2, 1*SATA Express*
10*SATA3 ,2*M.2, 1*SATA Express*
SATA RAID
RAID 0,1,5,10
RAID 0,1,5,10
RAID 0,1,5,10
RAID 0,1,5,10
USB
12*USB 3.0 +6*USB 2.0
12*USB 3.0 +6*USB 2.0
8*USB 3.0 +8*USB 2.0
8*USB 3.0 +8*USB 2.0
Audio
Realtek ALC1150 115dB HD Audio
Realtek ALC1150 115dB HD Audio
Realtek ALC1150 115dB HD Audio
Realtek ALC1150 115dB HD Audio
LAN
Dual Intel GbE LAN
Dual Intel GbE LAN
Intel GbE LAN
Intel GbE LAN
Features & Software
11ac WIFI +BT 4.0 card onboard, 4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, OC button, Fast Boot Button, Q-Flash Plus, CFOS, Cloud Station, Thunderbolt™ Ready, Ambient LED, All stainless steel connectors on rear panel
11ac WIFI +BT 4.0 card onboard, 4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors,Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, OC button, Fast Boot Button, Q-Flash Plus, CFOS, Cloud Station, Thunderbolt™ Ready, Ambient LED, All stainless steel connectors on rear panel
4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, Q-Flash Plus, CFOS, Cloud Station, Thunderbolt™ Ready, Ambient LED, All stainless steel connectors on rear panel
4-Way SLI, 4-Way CrossFire, IR Digital CPU Power, 2x Copper PCB, Durable Black Solid capacitors, Dual M.2 Connectors, Cooper Bussmann Server Level Chokes, High End Audio capacitors, Q-Flash Plus, CFOS, Cloud Station, Thunderbolt™ Ready, Ambient LED, All stainless steel connectors on rear panel
Form Factor (mm)
E-ATX (305×259)
E-ATX (305×259)
ATX (305×244)
ATX (305×244)
Craig O'Sullivan

Creator of Geektech.ie Passionate about Technology and always looking for that next cool gadget or app

Leave a Comment